Harvest Solutions

BVV MagSil PR Adsorbent For Chromatography

BVV MagSil PR Adsorbent for Chromatography is an adsorbent for the separation of lipids and is a commercially prepared magnesia-silica gel. MagSil has a coarse mesh size which helps with rapid flow rate for column chromatography. It's main benefit is pesticide removal from extracted plant material and will dramatically improve the color and clarity of the material. It also has the provided benefit to bind to polar water-soluble compounds which can be filtered out through a 20-micron mesh screen. Comes in a 100 or 500-gram container and is white, powdery, and granular in its consistency. Each bag includes a 5cc scoop inside.

Sintered Filter Disk Kit

Stainless steel disk kits offer the user a great solution to help with finer filtration during the extraction and post-extraction process and they come standard with a 5 Micron Stainless Steel Sintered Filter Disk with Viton O-ring, filter plate, clamp, and gasket. These filter disk are recommended to be used simultaneously with ashless filter papers or any other filtration media like stainless steel ball bearings or steel wool to increase surface and filtration level to remove fats, lipids, waxes, and any other unwanted material during the extraction process. 

Note: These filter disks will clog without pre-filtration to help aid the fine filtration of the sintered disk.

Sizes Available:

• 1.5" 
• 2"
• 3"
• 4"
• 6"
• 10" 
• 12" 

50# High Purity USA N-Butane Lot Analysis 99.83%, 99.5% Guaranteed - (CGA FITTING NOT INCLUDED)

This unit is intended for LEGAL purposes only, to be used in accordance with local laws and ordinances. Use only in WELL VENTILATED AREAS!

 Free of any hydrogen Sulphide based Ethyl Mercaptan Odorants.

*Holds the equivalent of (65) 10oz cans of butane.

*This product is clean, colorless and odorless.

*Cylinder is fitted with a 1/4″ male SAE flare fitting on the valve assembly.

*Actual N-butane liquid weight is 20LB/10.9KG

*Due to Hazmat regulation solvent tanks cannot be safely transported via means other than by ground. If combined with additional items in an order, the tank will ship ground at no additional cost to the consumer. We will not refund express shipping charges if the tank arrives after the primary order arrives. Safety First!

*This item is *local pick-up only*

DISCLAIMER: This unit is intended for LEGAL purposes only, to be used in accordance with local laws and ordinances

Rosin filter bags are instrumental in the rosin extraction process and will yield and help remove unwanted contaminants from your end product. By using filter bags they allow you to pack material in tighter together which allows more pressure to be created on a smaller point. Filtration levels of the bags vary from our lowest 25-micron level to our largest 220-micron level and this allows the user to have a wider selection for their application. These mesh bags are also intended to be tossed out after use because the filtration media will be clogged after usage.

Key Features:

• Increased Yield

• Higher Possible Pressure

• Stitched seam to prevent blowouts

• Wide Range of Micron Levels
• Ultra fine stitched seam to prevent blowouts
• Exceptionally fine supplementary nylon mesh for mechanical fractioning
• Wide range of micron levels
• Medium filtration with increased yield

Sizes Available (Micron):

• 25μm

• 45μm

• 73μm

• 90μm

• 120μm

• 160μm

• 190μm

• 220μm

Specifications:

• Bag Dimensions: 2.5" x 3.25"

• Material: Nylon

• Seam Type: Stitched

• Quantity Per Pack: 10

Filter bags are a key part of the rosin tech process. Our rosin tech filter bags are sealed using a special ultrasonic sealing technology, which means there is no need to flip filter bags inside out, and no chance you'll end up losing yield in stitches.